中文
Italian
Türkçe
Português
Español
Deutsch
العربية
Tiếng Việt
Français
Русский
한국어
Ms.Lizzy
Hi, this is Lizzy from Dinosaw ( Not a Robot ). Which Machine ( model ) do you want? Please WhatsApp us now
Open Hours:8:30am-20:30pm
WhatsApp: +86 198-5901-3937
Compact industrial multi‑wire saw for composite and hard/brittle materials. Up‑feed cutting and constant tension (±0.5 N) deliver high precision, low damage, and thin kerf (~0.5–0.8 mm). Ideal for process validation and small‑batch thin slabs; rigid build ensures stable operation.
Slices SiC, optical glass, ceramics, and graphite for pilot production. Supports semiconductor wafers and optical components with consistent thickness and surface quality, reduces waste, and speeds scale‑up from prototype to production.
3.6 mFull-size block slicing in a down-feed platform
~3 mmThin-slab production capability
4 Control OptionsInovance · INVT · Siemens · SINEE
Applicable Materials
Granite, marble, quartzite, engineered stone and other hard stones
Certifications & Credentials
CE Certified · ISO 9001:2015 · Industry Standard Drafting Participant · 120+ Countries & Regions Served
Compatible Materials & Products
Precision Thin Slicing for Hard‑Brittle Materials
Alumina Ceramics > Substrates
Graphite Block > Anode Materials
Real Cutting Performance & Key Metrics
The DS-D-G3623 pairs down-feed efficiency with full-size capacity: 3600 × 2300 mm blocks, 270 kW installed power, 0–300 N servo tension and automatic wire-break protection that gets production running again in under an hour.
3600×2300×2300 mm
Max. Cutting Size
Full-size quarry blocks in a down-feed layout with a 2400 mm stroke.
±0.3 mm
Cutting Accuracy
Precision-machined grooves, spacer plates and servo synchronization hold thickness across the 2.35 m roller set.
0–300 N
Servo Wire Tension
The widest tension window in the D range covers fine wires and hard-stone loads.
45–60 min
Wire-Break Recovery
Automatic stop on detection; one operator replaces a broken wire in about 45–60 minutes, about 30 with two, and the wire welding machine finishes the cut.
Applicable materials: Granite, marble, quartzite, limestone, engineered stone and other hard stones.
Typical products: High-precision standard and thin slabs from full-size blocks, factory-scale slab programs.
Wire count and slab output are configuration-dependent, not fixed machine limits. Actual cutting speed and accuracy vary with stone hardness, block dimensions, wire specification and on-site conditions.
Specs and options
The DS-D-G3623 is the larger down-feed size: 3.6 m cutting width, 270 kW installed power and 40 tons of machine weight. Control brands are selectable across Inovance / INVT / Siemens / SINEE, and rollers (Φ320/Φ350/Φ400 × 2350) are matched to the slab program; the compact DS-D-G3412 covers 3.4 m-class production with the same architecture.
| Model | Units | DS-D-G3412 | DS-D-G3623 |
|---|---|---|---|
| Max. Cutting Size | mm | 3400×1200×2300 | 3600×2300×2300 |
| Max. Wire Speed | m/min | 0–35 | 0–35 |
| Main Motor Power | kW | 64×4 | 64×4 |
| Total Installed Power | kW | 270 | 270 |
| Lifting Stroke | mm | 2400 | 2400 |
| Diamond Wire Specification | mm | 0.35–0.8 | 0.35–0.8 |
| Roller | mm | Φ320/Φ350/Φ400×1250 | Φ320/Φ350/Φ400×2350 |
| Control System | / | Inovance / INVT / Siemens / SINEE | Inovance / INVT / Siemens / SINEE |
| Diamond Wire Tension | N | 0–300 | 0–300 |
| No. of Workstations | / | 1+2 | 1+2 |
| Overall Dimensions (L×W×H) | mm | 8900×6400×5300 | 9200×7500×5300 |
| Machine Weight | T | 38 | 40 |
| Main Spindle Box / qty. | mm×pcs | 280×8 | 280×8 |
Core Technology & Machine Structure
Six core systems for factory-scale precision slicing. The numbered points on the machine diagram correspond to the systems below.
DS-D-G3623 Precision Slicing Workflow
A cycle follows four steps: load and square the full-size block, thread wires per the slab program, apply stored or AI-recommended parameters, then feed the wire web down to cut. On wire break the machine stops automatically; a wire welding machine reconnects wires to finish the cut.
01
Down-Feed Precision Architecture
The wire web feeds downward through the block — fast wire handling per setup (with up to 60% lower diamond-wire consumption per setup) and the layout preferred for thin-slab and high-frequency changeover programs.
02
40-Ton Cast Platform
A 40-ton cast structure (9.2 × 7.5 × 5.3 m) carries full-width cutting forces while keeping the down-feed layout's compact footprint.
03
Four Grooved Main Rollers
Four precision-grooved main rollers seat the full wire web and define slab thickness; alternating servo rotation extends wire life through long factory cycles.
04
Dual-Range Servo Tension
The 0–300 N servo tension system adapts from fine thin-slab wires to hard-stone loads, compensating elongation automatically.
05
Configurable Global Control & Drive Brands
PLC/HMI/servo systems are selectable from Inovance, INVT, Siemens and SINEE, with inverters from EURA, Siemens and Mitsubishi, reducers from SEW, Nord and Bonfiglioli, and bearings from HRB, NSK or SKF — configured to your project's requirements and local service availability.
06
AI Recipes & Remote Service
The DINOSAW AI recipe system recommends parameters from stone type, hardness, block size and thickness; remote diagnosis and online support are included through the machine's life.
Down-Feed vs. Stone-Lifting Multi-Wire Saws
A selection guide for factories deciding between D and U architectures at full block size.
The Manufacturer Behind the DS-D-G3623
DINOSAW is a manufacturer of CNC stone processing machinery, specializing in diamond wire saw machines and CNC stone cutting equipment. With more than 20 years of R&D and manufacturing experience, DINOSAW contributes to industry standards including T/CMES 41001-2025 for CNC wire saw machines, holds 100+ technical patents, and supplies equipment and technical support to customers in 120+ countries and regions. Its manufacturing and management systems are certified to ISO 9001, ISO 14001 and ISO 45001, with CE-compliant machinery for international markets.
Installation Requirements & After-Sales Support
DINOSAW provides installation guidance, one month of training, monthly maintenance inspection and remote diagnosis for every machine.
Power Supply270 kW installed, 380/440 V
±5% fluctuation limit; 1.2–1.5× capacity reserve.
Foundation & Crane> 20 t/m² + overhead crane
Foundation per DINOSAW drawings; crane rated for 3.6 m blocks and the 40 T machine body.
Water & Spares50 L/min + 2-year spares plan
Recycling recommended; DINOSAW provides a recommended two-year spare parts list (rollers, spacer plates, rubber rings, wires) with the machine.
01 · Pre-Shipment & DeliveryMachine configuration, packaging and transport requirements confirmed before dispatch, with factory inspection and documents verified.
02 · Installation & CommissioningOn-site utilities and foundation check, machine positioning, commissioning and acceptance.
03 · Operator TrainingHands-on training covering routine CNC operation and daily checks of diamond wire, guide wheels, tensioning, cooling and lubrication.
04 · After-Sales SupportRemote technical assistance, maintenance support and spare parts coordination throughout the machine's service life.
DS-D-G3623 Selection, Installation & Operation FAQ
Common Questions About the Pilot-Line Multi-Wire Saw
The D series offers the widest brand selection in the range: PLC, HMI and servo systems from Inovance, INVT, Siemens or SINEE; inverters from EURA, Siemens or Mitsubishi; reducers from SEW, Nord or Bonfiglioli; and bearings from HRB, NSK or SKF. DINOSAW configures the combination to your project's performance requirements and local service availability.
Contact Dinosaw
Discuss DS-D-G3623 Pricing, Configuration & ApplicationAre you looking for the perfect cutting machines or processing solutions for hard and brittle materials?
Facing challenges in stone quarrying, countertop cutting, concrete and underwater pipeline cutting, stainless steel rust removal and grinding, luxury thin slab cutting, agate and gemstone cutting, graphite cutting, or even building demolition?
Leave your inquiry, and you can expect a reply within 12 hours with tailored solutions!
Diamond Thin Multi-Wire Saw for Factory Production
What materials will you be working with? *
Your Name / Company Name？ *
Phone Number / Email Address？ *
+86
What specific requirements do you have?
DS-D-G3623 Guides & Related Machines
Selection guides and related equipment for factory-scale precision block slicing.
Guides & Support
Marble Block Cutting Upgrade: Thin Multi-Wire vs Gang Saw Yield & 26% Profit Boost
Stop losing block value to inefficient gang saws. Compare thin multi-wire vs. gang saw yield rates and see how to hit a 26% profit boost with ultra-thin cutting technology. Includes a 60-second shop-readiness test to scale your high-value marble fabrication.
How to Choose a CNC Multi-Wire Saw: Configurations & Specs
Select the right multi-wire cutting machine by materials, thickness, wire count, tension control, PLC integration, footprint, and TCO.
Thin Multi-Wire Saw Operation & Maintenance Guide
A practical guide for multi-wire saw operators and technicians. Get SOPs, troubleshooting tips for common faults, and a preventative maintenance schedule to ensure peak performance and safety.
Related Machines
Electroplated & Vacuum Brazed Diamond Wire Saw for Marble Quarrying
Engineered for slicing SiC, sapphire, optical glass, and alumina ceramics. Our electroplated diamond wire delivers a thin kerf and low-damage surface finish, maximizing yield for valuable materials and ensuring high-quality components.
Up‑feed Thin Multi‑Wire Stone Cutting Machine
The natural upgrade from pilot run to small-scale production. The DS-3412H retains high-precision up-feed cutting while increasing processing capacity, seamlessly transitioning your validated processes.
Thin Multi‑Wire Saw for Granite & Quartz Slabs
For high-hardness thick slabs, the down-feed mechanism provides robust, stable feeding. This design enhances cutting stability and throughput, boosting productivity for demanding materials like granite and engineered stone.
English
Hello 👋 How can we help?