中文
Italian
Türkçe
Português
Español
Deutsch
العربية
Tiếng Việt
Français
Русский
한국어
Ms.Lizzy
Hi, this is Lizzy from Dinosaw ( Not a Robot ). Which Machine ( model ) do you want? Please WhatsApp us now
Open Hours:8:30am-20:30pm
WhatsApp: +86 198-5901-3937
DINOSAW’s down‑feed thin multi‑wire saw delivers high‑throughput thin/medium‑thin slab cutting for hard stones. Stable tension, optimized wire speed, and robust gantry ensure small kerf (≈0.5–0.8mm), uniform thickness, and reduced polishing workload.
Ideal for granite, engineered quartz, and sintered stone premium slabs. Improves yield and finish quality versus gangsaw or multi‑blade cutters; supports large blocks and continuous production lines.
95-Wire Proven SetupProven on a 2000 mm medium-hard marble block / 20 mm slab program
3200 mmMaximum block width for quarry-scale slab production
±0.3 mmThickness accuracy across the full wire web
Applicable Materials
Granite, quartz, marble, limestone, engineered stone and other hard stones
Certifications & Credentials
CE Certified · ISO 9001:2015 · Industry Standard Drafting Participant · 120+ Countries & Regions Served
Compatible Materials & Products
hard stones thin/medium‑thin slabs
Sintered Stone ❯ Large‑format panels
Luxury Stone/Quartzite ❯ slabs
Real Cutting Performance & Key Metrics
The DS-U-G3220 is the workhorse of the U series: a 3200 mm cutting width runs a proven 95-wire setup on 2000 mm medium-hard marble in a 20 mm slab program — at ±0.3 mm accuracy on a 58-ton cast monoblock.
95 Wires
Proven 20 mm Slab Setup
A proven customer setup runs about 95 wires on a 2000 mm medium-hard marble block for 20 mm slabs.
±0.3 mm
Cutting Accuracy
Multi-groove main rollers, spacer plates and 0–260 N servo tension keep thickness consistent across the whole web.
3200×2300×2200 mm
Max. Cutting Size
Covers 3.2 m-class quarry blocks with a 2690 mm lifting stroke.
0.3–0.8 mm
Compatible Wire Range
Match wire diameter to stone hardness — 0.8 mm for hard granite, 0.60–0.65 mm for hard marble, 0.55 mm for soft marble — and switch programs by re-spacing.
Applicable materials: Granite, quartz, marble, limestone, travertine, engineered stone and other hard stones.
Typical products: High-volume standard and thin slabs for tile, countertop and panel production.
For thinner programs, slab output increases with the same block width — a 10 mm program on a 2000 mm block can reach about 181 slabs per cycle.
Wire count and slab output are configuration-dependent, not fixed machine limits. Actual cutting speed and accuracy vary with stone hardness, block dimensions, wire specification and on-site conditions.
Specs and options
The DS-U-G3220 covers 3.2 m-class blocks on a 58-ton cast-iron platform with 300 kW installed power and 35 m/s wire speed. Roller sets (Φ350/Φ400/Φ450 × 2050) are selected per slab program; the larger DS-U-G3623 is available for 3.6 m blocks.
| Model | Units | DS-U-G1212 | DS-U-G3220 | DS-U-G3623 |
|---|---|---|---|---|
| Maximum Cutting Size | mm | 1200×1200×1200 | 3200×2300×2200 | 3600×2300×2200 |
| Maximum Wire Speed | m/s | 35 | 35 | 35 |
| Main Motor Power | kW | 60×4 | 60×4 | 90×4 |
| Total Installed Power | kW | 300 | 300 | 400 |
| Lifting Stroke | mm | 2000 | 2690 | 2690 |
| Compatible Diamond Wire | mm | 0.3–0.8 | 0.3–0.8 | 0.3–0.8 |
| Rollers (dia. × length) | mm | Φ400/Φ450 ×1200 | Φ350/Φ400/Φ450 ×2050 | Φ350/Φ400/Φ450 ×2350 |
| Number of Trolleys | / | 1+2 | 1+2 | 1+2 |
| Machine Weight | T | 35 | 58 | 65 |
| Main Roller / Quantity | mm×pcs | 255(280)×8 | 255(280)×8 | 255(280)×8 |
| Electrical Control System | / | Inovance / INVT | Inovance / INVT | Inovance / INVT |
| Diamond Wire Tension | N | 0–260 | 0–260 | 0–260 |
| Overall Dimensions (L×W×H) | mm | 8330×5363×5200 | 9640×6170×6600 | 10150×6500×6600 |
Core Technology & Machine Structure
Six core systems behind a proven 95-wire production web. The numbered points on the machine diagram correspond to the systems below.
DS-U-G3220 Production Workflow
A cycle follows four steps: load and square the block on the lifting table, thread wires per the slab program (about 95 wires in the proven 20 mm setup on a 2000 mm block), apply stored or AI-recommended parameters, then lift and cut. Automatic stop on wire break protects the web.
01
Stone-Lifting Feed
The lifting worktable raises 3.2 m-class blocks into the wire web — the feed design chosen for stable cutting quality and lower maintenance on long production cycles.
02
58-Ton Cast Monoblock
A 58-ton one-piece cast-iron frame carries multi-wire loads at full block width and holds precision over ten-plus years of operation.
03
Four Grooved Main Rollers
Four precision-grooved main rollers seat the full wire count, prevent deviation and define slab thickness; alternating servo rotation extends wire service life.
04
Independent Servo Tension
The independent 0–260 N servo tension system compensates wire elongation and load changes, so every wire in the web cuts at stable tension.
05
Multi-Wire Positioning System
Positioning across a production-scale wire web is guaranteed by precision-machined roller grooves, accurate spacer plates and servo synchronization — the basis of consistent ±0.3 mm slabs.
06
AI Recipes & Remote Service
Enter stone type, hardness, block size and target thickness to receive AI-recommended parameters; remote diagnosis and online support run through the machine's life.
Multi-Wire Saw vs. Gang Saw for Granite & Quartz Production
A capacity-focused comparison for high-volume slab factories.
The Manufacturer Behind the DS-U-G3220
DINOSAW is a manufacturer of CNC stone processing machinery, specializing in diamond wire saw machines and CNC stone cutting equipment. With more than 20 years of R&D and manufacturing experience, DINOSAW contributes to industry standards including T/CMES 41001-2025 for CNC wire saw machines, holds 100+ technical patents, and supplies equipment and technical support to customers in 120+ countries and regions. Its manufacturing and management systems are certified to ISO 9001, ISO 14001 and ISO 45001, with CE-compliant machinery for international markets.
Installation Requirements & After-Sales Support
DINOSAW provides installation guidance, one month of training, monthly maintenance inspection and remote diagnosis for every machine.
Power Supply300 kW installed, 380/440 V
±5% fluctuation limit; 1.2–1.5× capacity reserve.
Foundation & Crane> 20 t/m² + overhead crane
Foundation per DINOSAW drawings; crane rated for 3.2 m blocks and the 58 T machine body.
Water50 L/min, recycling recommended
0.3 bar clean water; recycling saves water and protects the wire.
01 · Pre-Shipment & DeliveryMachine configuration, packaging and transport requirements confirmed before dispatch, with factory inspection and documents verified.
02 · Installation & CommissioningOn-site utilities and foundation check, machine positioning, commissioning and acceptance.
03 · Operator TrainingHands-on training covering routine CNC operation and daily checks of diamond wire, guide wheels, tensioning, cooling and lubrication.
04 · After-Sales SupportRemote technical assistance, maintenance support and spare parts coordination throughout the machine's service life.
DS-U-G3220 Selection, Installation & Operation FAQ
Common Questions About Thin Multi-Wire Stone Cutting
Output depends on stone hardness, slab thickness and wire specification, so there is no single fixed figure. In the proven 20 mm setup on 2000 mm medium-hard marble, the machine runs about 95 wires per cycle; cutting speed for medium-hard marble is typically around 150–200 mm/h downward. DINOSAW evaluates your block sizes and target program to project a realistic capacity figure before configuration.
Contact Dinosaw
Discuss DS-U-G3220 Pricing, Configuration & ApplicationAre you looking for the perfect cutting machines or processing solutions for hard and brittle materials?
Facing challenges in stone quarrying, countertop cutting, concrete and underwater pipeline cutting, stainless steel rust removal and grinding, luxury thin slab cutting, agate and gemstone cutting, graphite cutting, or even building demolition?
Leave your inquiry, and you can expect a reply within 12 hours with tailored solutions!
Thin Multi‑Wire Saw for Granite & Quartz Slabs
What materials will you be working with? *
Your Name / Company Name？ *
Phone Number / Email Address？ *
+86
What specific requirements do you have?
DS-U-G3220 Guides & Related Machines
Selection guides and related equipment for high-volume granite and quartz slab production.
Guides & Support
Marble Block Cutting Upgrade: Thin Multi-Wire vs Gang Saw Yield & 26% Profit Boost
Stop losing block value to inefficient gang saws. Compare thin multi-wire vs. gang saw yield rates and see how to hit a 26% profit boost with ultra-thin cutting technology. Includes a 60-second shop-readiness test to scale your high-value marble fabrication.
How to Choose a CNC Multi-Wire Saw: Configurations & Specs
Select the right multi-wire cutting machine by materials, thickness, wire count, tension control, PLC integration, footprint, and TCO.
Thin Multi-Wire Saw Operation & Maintenance Guide
A practical guide for multi-wire saw operators and technicians. Get SOPs, troubleshooting tips for common faults, and a preventative maintenance schedule to ensure peak performance and safety.
Related Machines
Multi-head Automatic Marble & Granite Polishing Machine
Inline slab polishing to reduce post‑cut finishing time; ideal for thin/medium‑thin slabs. Pairs with thin multi‑wire slicing to deliver ready‑to‑ship surfaces, minimizing rework. Improves downstream throughput and overall line takt.
Quarry Diamond Wire Saw Machine for Marble and Granite Block Extraction
Efficient block extraction and pre‑shaping at quarries; stable feed for large blocks. Provides consistent block geometry for secure down‑feed clamping in multi‑wire lines. Enhances yield and reduces setup time before thin‑slab slicing.
CNC Stone Bridge Saw for Precision Cutting
Precision cross‑cutting and sizing of slabs; supports countertop and panel formats. Complements thin multi‑wire slab production with accurate dimensioning and edge quality. Reduces finishing waste and speeds order fulfillment.
English
Hello 👋 How can we help?