中文
Italian
Türkçe
Português
Español
Deutsch
العربية
Tiếng Việt
Français
Русский
한국어
Ms.Lizzy
Hi, this is Lizzy from Dinosaw ( Not a Robot ). Which Machine ( model ) do you want? Please WhatsApp us now
Open Hours:8:30am-20:30pm
WhatsApp: +86 198-5901-3937
Designed for medium blocks, this up-feed thin multi-wire stone cutting machine delivers a small kerf (≈0.5–0.8mm), uniform thickness, and superior surface flatness. Its constant-tension control and optimized wire speed ensure stable thin-slab slicing for both natural and engineered stones.
It excels on high-value materials like marble, luxury stone, engineered quartz, and sintered stone, plus hard-brittle materials like optical glass. Compared to gangsaws, it increases yield and reduces polishing workload, making it ideal for efficient thin-slab production.
3.6 mLargest U-series block width
90 kW × 4Main drive power for full-width hard-stone cutting
65 TOne-piece cast platform for heavy multi-wire loads
Applicable Materials
Granite, marble, quartzite, engineered stone and other hard stones
Certifications & Credentials
CE Certified · ISO 9001:2015 · Industry Standard Drafting Participant · 120+ Countries & Regions Served
Compatible Materials & Products
Materials to Premium Thin Slabs & Panels
Engineered quartz ❯ Thin slabs
Sintered stone ❯ Large panels
Alumina ceramic ❯ Thin slices
Real Cutting Performance & Key Metrics
The DS-U-G3623 is the largest stone-lifting multi-wire saw in the DINOSAW range: a 65-ton cast monoblock, four 90 kW main drives and 30–40 m/s wire-speed capability support full-width cutting on blocks up to 3.6 × 2.3 × 2.2 m.
3600×2300×2200 mm
Max. Cutting Size
Full-size quarry blocks up to 3.6 m wide with a 2690 mm lifting stroke.
90 kW × 4
Main Drive Power
Four 90 kW main motors — 400 kW total installed — deliver torque for hard-stone, full-width cutting.
30–40 m/s
Wire Speed
The confirmed new configuration runs the wire web at 30–40 m/s, sustaining production efficiency on long full-width cuts.
±0.3 mm
Cutting Accuracy
Grooved rollers, spacer plates, servo synchronization and 0–260 N tension control hold thickness across the widest web in the range.
Applicable materials: Granite, marble, quartzite, limestone, engineered stone and other hard stones.
Typical products: Premium large-format slabs, high-volume thin and standard slab programs from full-size quarry blocks.
Wire count and slab output are configuration-dependent, not fixed machine limits. Actual cutting speed and accuracy vary with stone hardness, block dimensions, wire specification and on-site conditions.
Specs and options
The DS-U-G3623 tops the U series: 3.6 m cutting width, 400 kW installed power and 65 tons of machine weight. Electrical brands, roller specifications (Φ350/Φ400/Φ450 × 2350) and the 1+2 workstation layout are configured per project; the workshop must provide a foundation rated above 20 t/m² and crane capacity for full-size blocks.
| Model | Units | DS-U-G1212 | DS-U-G3220 | DS-U-G3623 |
|---|---|---|---|---|
| Maximum Cutting Size | mm | 1200×1200×1200 | 3200×2300×2200 | 3600×2300×2200 |
| Maximum Wire Speed | m/s | 35 | 35 | 35 |
| Main Motor Power | kW | 60×4 | 60×4 | 90×4 |
| Total Installed Power | kW | 300 | 300 | 400 |
| Lifting Stroke | mm | 2000 | 2690 | 2690 |
| Compatible Diamond Wire | mm | 0.3–0.8 | 0.3–0.8 | 0.3–0.8 |
| Rollers (dia. × length) | mm | Φ400/Φ450 ×1200 | Φ350/Φ400/Φ450 ×2050 | Φ350/Φ400/Φ450 ×2350 |
| Number of Trolleys | / | 1+2 | 1+2 | 1+2 |
| Machine Weight | T | 35 | 58 | 65 |
| Main Roller / Quantity | mm×pcs | 255(280)×8 | 255(280)×8 | 255(280)×8 |
| Electrical Control System | / | Inovance / INVT | Inovance / INVT | Inovance / INVT |
| Diamond Wire Tension | N | 0–260 | 0–260 | 0–260 |
| Overall Dimensions (L×W×H) | mm | 8330×5363×5200 | 9640×6170×6600 | 10150×6500×6600 |
Core Technology & Machine Structure
Six core systems scaled for the largest blocks in the range. The numbered points on the machine diagram correspond to the systems below.
DS-U-G3623 Production Workflow
A cycle follows four steps: load and square the full-size block on the lifting table, thread wires per the slab program, apply stored or AI-recommended parameters, then lift and cut with automatic protection on wire break.
01
Heavy-Duty Lifting Platform
The lifting table raises 3.6 m-class blocks into the wire web — the stable feed architecture for the heaviest production loads, with a 2690 mm stroke for tall blocks.
02
65-Ton Cast Monoblock
At 65 tons, the one-piece cast-iron frame is built to absorb full-width multi-wire cutting forces and hold precision for over ten years of operation.
03
Four Grooved Main Rollers
Four main rollers (255/280 mm spindle boxes × 8) with precision grooves seat the full wire web, prevent deviation and define slab thickness across the entire block width.
04
High-Capacity Servo Tension
The 0–260 N servo tension system automatically compensates elongation and load changes across the widest web in the range.
05
Full-Width Multi-Wire Positioning
Spacer plates and servo synchronization keep wire spacing accurate across the full 3.6 m width, so the last slab matches the first.
06
AI Recipes & Remote Service
The DINOSAW AI recipe system recommends cutting parameters by stone type, hardness, block size and thickness; remote diagnosis supports the machine through its service life.
3.6 m Multi-Wire Saw vs. Multiple Smaller Saws
A capacity-planning comparison for factories weighing one large saw against several small ones.
The Manufacturer Behind the DS-U-G3623
DINOSAW is a manufacturer of CNC stone processing machinery, specializing in diamond wire saw machines and CNC stone cutting equipment. With more than 20 years of R&D and manufacturing experience, DINOSAW contributes to industry standards including T/CMES 41001-2025 for CNC wire saw machines, holds 100+ technical patents, and supplies equipment and technical support to customers in 120+ countries and regions. Its manufacturing and management systems are certified to ISO 9001, ISO 14001 and ISO 45001, with CE-compliant machinery for international markets.
Installation Requirements & After-Sales Support
DINOSAW provides installation guidance, one month of training, monthly maintenance inspection and remote diagnosis for every machine.
Power Supply400 kW installed, 380/440 V
Largest supply in the range; 1.2–1.5× capacity reserve and voltage stabilization required.
Foundation & Crane> 20 t/m² + heavy overhead crane
Foundation strictly per DINOSAW drawings; crane rated for 3.6 m blocks and the 65 T machine body.
Water50 L/min, recycling recommended
0.3 bar clean water supply; recycling strongly recommended at full-width cutting loads.
01 · Pre-Shipment & DeliveryMachine configuration, packaging and transport requirements confirmed before dispatch, with factory inspection and documents verified.
02 · Installation & CommissioningOn-site utilities and foundation check, machine positioning, commissioning and acceptance.
03 · Operator TrainingHands-on training covering routine CNC operation and daily checks of diamond wire, guide wheels, tensioning, cooling and lubrication.
04 · After-Sales SupportRemote technical assistance, maintenance support and spare parts coordination throughout the machine's service life.
DS-U-G3623 Selection, Installation & Operation FAQ
Common Questions About Up‑feed Thin Multi‑Wire Stone Cutting Machine
A thin multi‑wire stone cutting machine uses fine diamond wire (≈0.35–0.6mm) to slice blocks into thin slabs with kerf ≈0.5–0.8mm.
- Constant tension + optimized wire speed → uniform thickness
- Lower heat input → smoother finish
- Narrow kerf → higher yield, less polishing, fewer breaks
Up‑feed suits marble, luxury stone, sintered stone when premium finish and thin‑slab consistency are required. Down‑feed suits engineered quartz and granite for high‑efficiency thin/medium slabs.
- Up‑feed: smooth debris, reduced wire bow
- Down‑feed: stable clamping, stronger cutting pressure
- Many plants deploy both for process segmentation
Materials: marble, luxury stone, engineered quartz, sintered stone; extends to optical glass and alumina ceramics with low‑damage parameters.
- Small kerf → higher yield
- Thickness uniformity → better downstream fit
- Flat surface → reduced finishing time
Narrow kerf (≈0.5–0.8mm) matters because it increases slab area per m³ block and cuts finishing time.
- Less lateral damage → cleaner edges
- Fewer micro‑cracks → higher quality
- Lower OPEX → better profitability
Yes. It stabilizes slicing of sintered stone large panels with constant tension, precision guidance and efficient cooling.
- Minimal chipping
- Uniform thickness
- Clean edges with small kerf → facade‑grade finish
Rotating table + transition carts cut idle time and raise throughput.
- Angle adjustment without re‑hoisting
- Parallel loading/unloading next to main table
- Smoother takt and safer handling for thin‑slab lines
Typical window: wire ≈0.35–0.6mm; kerf ≈0.5–0.8mm; feed 100–280 mm/h; wire speed: marble ≈15–25 m/s, granite ≈25–35 m/s.
- Co‑optimize tension/cooling/guidance
- Store per‑material recipes to balance yield, finish, wire life
Multi‑wire vs gangsaw:
- Higher yield per m³
- Better finish
- Smaller footprint + lower foundation cost
- Lower waste/effluent and noise
- Reduced energy/consumables/polishing → consistent thin‑slab quality for green, scalable lines
Plan for the machine envelope of about 10.2 × 6.5 × 6.6 m plus operating and maintenance zones, a foundation bearing more than 20 tons per square meter built to DINOSAW drawings, an overhead crane rated for full-size blocks and the 65-ton machine body, and 400 kW of installed power at 380/440 V. DINOSAW provides layout and foundation drawings for the selected model.
Contact Dinosaw
Discuss DS-U-G3623 Pricing, Configuration & ApplicationAre you looking for the perfect cutting machines or processing solutions for hard and brittle materials?
Facing challenges in stone quarrying, countertop cutting, concrete and underwater pipeline cutting, stainless steel rust removal and grinding, luxury thin slab cutting, agate and gemstone cutting, graphite cutting, or even building demolition?
Leave your inquiry, and you can expect a reply within 12 hours with tailored solutions!
Up‑feed Thin Multi‑Wire Stone Cutting Machine
What materials will you be working with? *
Your Name / Company Name？ *
Phone Number / Email Address？ *
+86
What specific requirements do you have?
DS-U-G3623 Guides & Related Machines
Selection guides and related equipment for full-size quarry block processing.
Guides & Support
Marble Block Cutting Upgrade: Thin Multi-Wire vs Gang Saw Yield & 26% Profit Boost
Stop losing block value to inefficient gang saws. Compare thin multi-wire vs. gang saw yield rates and see how to hit a 26% profit boost with ultra-thin cutting technology. Includes a 60-second shop-readiness test to scale your high-value marble fabrication.
How to Choose a CNC Multi-Wire Saw: Configurations & Specs
Select the right multi-wire cutting machine by materials, thickness, wire count, tension control, PLC integration, footprint, and TCO.
Thin Multi-Wire Saw Operation & Maintenance Guide
A practical guide for multi-wire saw operators and technicians. Get SOPs, troubleshooting tips for common faults, and a preventative maintenance schedule to ensure peak performance and safety.
Related Machines
Thin Multi‑Wire Saw for Granite & Quartz Slabs
High‑efficiency thin/medium slab cutting for luxury stone, engineered quartz, sintered stone and other hard stones; low kerf loss and consistent thickness, ideal for high‑volume lines.
Diamond Wire Saw Machine for Stone Block Squaring
Gantry‑style PLC‑controlled single wire saw for factory block edging; precise trimming, stable clamping, and streamlined pre‑slab processing. Complements multi‑wire thin‑slab lines for higher overall throughput.
Multi-head Automatic Marble & Granite Polishing Machine
Inline continuous polishing for large slabs; reduces post‑cut finishing time and delivers premium surface flatness and gloss, complementing multi‑wire thin‑slab production for higher throughput.
English
Hello 👋 How can we help?